OES8000

Application fields
 
The element analysis for metal materials is a traditional work for the research and development, quality control, process control and other related works in the field of the metal smelting, casting and processing industry.
 
 
 
Skyray Optical Emission Spectrometer is widely used in the element analysis of ferrous and non-ferrous metal. The instrument can simultaneously analyze dozens of elements with a fast, accurate and stable performance, meeting the requirements in industrial development, process control, incoming inspection, product sorting, etc.
 
 
 
Skyray Optical Emission Spectrometer provides a convenient, eco-friendly and low-cost solution for metal analysis, making the R&D, production process and product quality more controllable, helping users upgrade the level of  technology and quality; while accelerating the relevant procedures and creating economic and environmental benefits for users. Optical Emission Spectrometer has been a typical device to evalue the level of technology and product quality for a factory.
 
 
 
Performance advantages
 
Based on the Multi-CCD detector and total spctrum technology, Optical Emission Spectrometer OES 8000 detect all the spectral lines within the range of wavelength; so it is extremely easy to install and add the matrix, channels and analytical program. With a compact size, it is easy to maintain and locate in the laboratory. OES 8000 is a good choice of the complex  analysis for ferrous and non-ferrous metals in one instrument.
 
 
 
 Thanks to the Multi-CCD detector and total spctrum technology, it is easier to install and add the matrix, channels and analytical program in Skyray or customers’ laboratory
 
 Require smaller space for laboratory because of the compact size
 
 Work for 24/7 to serve your business with high stability and reliability
 
 Fast way to analyze and demonstrate the results within 35 seconds
 
 The operation and maintenance are simple and convenient for operators
 
 All of the typical analytical programs are calibrated in Skyray, which are more accurate and test more types of metal grades
 
 Easy to calibrate  the instrument with the standardization samples
 
 Without chemical reagents, the analysis process is safe and eco-friendly.
 
 
 
Requirements
 
Ambient temperature: 15-30°C
 
Atmospheric humidity: ≤70%
 
Power: Voltage  220V ± 5V 50Hz; single phase with protective ground
 
No vibration, dust, strong electromagnetic interference, strong airflow or corrosive gases in the laboratory
 
 
 
Auxiliary equipments
 
Argon—The purity is above 99.999%
 
AC parameter voltage stablilizer—1KVA
 
Grinding machine—For the samples like Steel, Nickel alloy, etc
 
Small lathe—For the samples like Aluminum, Copper, Zinc, Magnesium, etc
 
Air conditioner—Select suitable power according to the area of laboratory
 
 
 
Technical Specifications
 
 
 
Spectrometer design
 
◇ Paschen-Runge polychromator, 350mm focal length
 
◇ Effective wavelength range: 140-800 nm
 
◇ Resolution:10pm/pixel
 
◇ Temperature controlled at 34 ± 0.5℃, vacuum type or air type
 
◇ Special casting materials reduce the deformation of the chamber
 
 
 
Spark Source
 
◇ Digital plasma generator
 
◇ High energy pre-spark (HEPS)
 
◇ Frequency:100-1000Hz
 
◇ Current: 1-80A
 
 
 
Grating
 
◇ Holographic concave grating: 3600 l/mm
 
◇ Dispersion of the first order spectrum: 1.2nm/mm
 
 
 
Spark Stand
 
◇ 4mm analytical gap of the sample stand
 
◇ Jet stream technology
 
◇ No Argon consumption in standby mode
 
 
 
Detector
 
◇ High-performance linear array CCD
 
 
 
Dimension and Weight
 
◇ Dimensions: Height 450 Width 750 Depth 800
 
◇ Weight: 85kg
 
 
 
Analysis Time
 
◇ Depend on the type of materials, typically less than 30 seconds
 
 
 
 
 
Electrical Power
 
◇ Max. 1.5kVA
 
◇ Standby mode: 70VA
 
 
 
Technical advantages
 
 
 
Comprehensive analysis for the elements in most metals with the full spectrum detection
 
Based on the CCD detector with the full spectrum detection technology, the instrument can comprehensively detect the spectral lines of the most of the elements in the metal samples, and carry out analysis for  multi-matrix and multi-elements easily. Therefore, it is convenient and inexpensive to install and add the matrix, channels and analytical program in Skyray or customers’ laboratory
 
 
 
Professional test solution
 
With long experience in analysis technology service, Skyray Instrument provides users with the sound solutions for the analysis of ferrous and non-ferrous metal.
 
The analysis programs in our solution are designed according to the classification of metal grade, meeting the various test demands of users perfectly.
 
The analysis programs are factory-calibrated with international or national standard samples, and have been fitted and corrected by professional software.
 
Just using a few pieces of the standardization samples supplied by Skyray, the user can carry out the routine calibration easily.  So it is unnecessary to purchase a large number of standard samples for the analysis program.
 
 
 
Top international suppliers provide the core components
 
Dispersive device—The grating manufactured by CARI ZEISS in Germany ensure the excellent resolution.
 
Detector—CCD manufactured by TOSHIBA in Japan ensure the detection of spectrum sensitive and low noise.
 
Optical lens is manufactured by CARI ZEISS in Germany;
 
Optical fiber is manufactured by Agilent Technologies in America.
 
 
 
Excellent thermostat system for the polychromator
 
The thermostatic chamber is configured with a feedback heating device and the highly efficient thermal insulating layer, ensuring the temperature of the polychromator.
 
The thermostatic chamber suppress the drift of optical path due to the slight changes in the dimensions of the mechanical components in different temperatures. Meanwhile, the constant temperature is beneficial to the  performance of photoelectric devices.
 
  
 
Test examples
 
Sampling
 
There are two kinds of sampling for spectrochemical analysis: the melt sampling and the product sampling. In the melt sampling, the metal liquid is injected into the mold and solidify into a solid sample. In the product sampling, the size and shape of the sample should be considered to judge whether cutting it or not.
 
Reference standards
 
ISO 14284 Steel and iron—Sampling and preparation of samples for the determination of chemical composition
 
ASTM E 1806 Standard Practice for Sampling Steel and Iron for Determination of Chemical Composition
 
ASTM E 716 Standard Practices for Sampling and Sample Preparation of Aluminum and Aluminum Alloys for Determination of Chemical Composition by Spectrochemical Analysis
 
 
 
Preparation
 
For the high hardness metal samples(such as steel, Nickel, Cobalt alloy), grind the surface with the grinding machine; for the low hardness metal samples( such as Aluminum, Copper, Zinc, Magnesium alloys),  turn the surface with  the lathe. The treated surface should be flat and smooth with scratches in the same direction.
 
 
 
Analysis
 
Place the sample on the spark stand and start the analysis process by operating the software. After completing the test, all the results of the customized elements are displayed simultaneously. The time of a single procedure is less than 40 seconds, and analyzing the same sample for the three times is  genegrally recommended .
 
 
 
Save the result
 
The results of the analysis could be stored in the database of the software or printed directly.
 
n style='mso-spacerun:yes'>  genegrally recommended .
 
 
Save the result
 
The results of the analysis could be stored in the database of the software or printed directly.